Direkt zum Inhalt springen
Menü

Veröffentlichungen

Artikel in Fachzeitschriften, Beiträge in Büchern und Conference Proceedings, Monographien

  • Hegner, A.; Cebull, H. L.; Gamez, A. J.; Blase, C.; Goergen, C. J.; Wittek, A. (2023): Biomechanical Characterization of Tissue Types in Murine Dissecting Aneurysms based on Histology and 4DUltrasound-Derived Strain. doi: 10.21203/rs.3.rs-2535619/v1 (under review, Biomechanics and Modeling in Mechanobiology, "Special Issue": Advances in Soft Tissue Mechanics, Euromech Colloquium, Frankfurt University of Applied Sciences, 6.-8.04.2022, Frankfurt am Main, Germany). (Preprint)

  • Hucke, L.; Holder, J.; van Drongelen, S.; Stief, F.; Gámez, A. J.; Huß, A.; Wittek, A. (2023b): Influence of tension-band plates on the mechanical loading of the femoral growth plate during guided growth due to coronal plane deformities. In: Front. Bioeng. Biotechnol. 11, S. 1165963. DOI: 10.3389/fbioe.2023.1165963. (peer reviewed)

  • Hegner, A.; Wittek, A.; Derwich, W.; Huß, A.; Gámez, A. J.; Blase, C. (2023): Using averaged models from 4D ultrasound strain imaging allows to significantly differentiate local wall strains in calcified regions of abdominal aortic aneurysms. In: Biomech Model Mechanobiol 15 (4), "Special Issue": Advances in Soft Tissue Mechanics (Euromech Colloquium, Frankfurt University of Applied Sciences, 6.-8.04.2022, Frankfurt am Main, Germany), S. 827. DOI: 10.1007/s10237-023-01738-x. (peer reviewed)

  • Derwich, W.; Keller, T.; Filmann, N.; Schmitz-Rixen, T.; Blase, C.; Oikonomou, K.; Wittek, A. (2023): Changes in Aortic Diameter and Wall Strain in Progressing Abdominal Aortic Aneurysms. In: Journal of ultrasound in medicine : official journal of the American Institute of Ultrasound in Medicine. DOI: 10.1002/jum.16193. (peer reviewed)

  • Eichner, N.; Wittek, A.; Hanusek, S.; Holder, J.; van Drongelen, S.; Stief, F.; Wuttke, U. (2023): Numerical investigation of the influences of a hip joint endoprosthesis on joint loading and muscle forces. In: J. Stebbins, H. Böhm, L.-S. Chou, R. Clark und A. Hatton (Hg.): GAMMA 2023 Abstracts. Gait & Posture 100 (Supplement 1): Elsevier, S. 13–14. (peer reviewed)

  • Hucke, L.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Stief, F.; Huß, A.; Wittek, A. (2023): How does hemiepiphysiodesis by use of tension band implants change the stress distributions in femoral growth plate tissue during guided growth? In: J. Stebbins, H. Böhm, L.-S. Chou, R. Clark und A. Hatton (Hg.): GAMMA 2023 Abstracts. Gait & Posture 100 (Supplement 1): Elsevier, S. 101–102. (peer reviewed)

  • Hucke, L.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Stief, F.; Huß, A.; Wittek, A. (2023): How does hemiepiphysiodesis by use of tension band implants change the stress distributions in femoral growth plate tissue during guided growth? In: J. Stebbins, H. Böhm, L.-S. Chou, R. Clark und A. Hatton (Hg.): GAMMA 2023 Abstracts. Gait & Posture 100 (Supplement 1): Elsevier, S. 101–102. (peer reviewed)

  • Resch, S.; Schwind, V., Völz, D. (2023): Body position in virtual reality – balancing support for patients with neuropathy, Proceedings on Automation in Medical Engineering 2 (1).

  • Eichner, N.; Wittek, A.; Hanusek, S.; Holder, J.; van Drongelen, S.; Stief, F.; Wuttke, U. (2023): Numerical investigation of the influences of a hip joint endoprosthesis on joint loading and muscle forces. In: J. Stebbins, H. Böhm, L.-S. Chou, R. Clark und A. Hatton (Hg.): GAMMA 2023 Abstracts. Gait & Posture 100 (Supplement 1): Elsevier, S. 13–14.

  • Hucke, L.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Stief, F.; Huß, A.; Wittek, A. (2023): How does hemiepiphysiodesis by use of tension band implants change the stress distributions in femoral growth plate tissue during guided growth? In: J. Stebbins, H. Böhm, L.-S. Chou, R. Clark und A. Hatton (Hg.): GAMMA 2023 Abstracts. Gait & Posture 100 (Supplement 1): Elsevier, S. 101–102.

  • Wittek, A.; Holder, J.; Stief, F.; Wuttke, U.; van Drongelen, S. (2023): Comparison of numerically estimated hip joint muscle forces before and after total hip replacement. In: J. Stebbins, H. Böhm, L.-S. Chou, R. Clark und A. Hatton (Hg.): GAMMA 2023 Abstracts. Gait & Posture 100 (Supplement 1): Elsevier, S. 105–106.

  • Völz, D., Benderoth, G., Erol, S.: A participatory approach to redesign a tube connecting system for home parental nutrition. Current Directions in Biomedical Engineering, vol. 8, no. 2, 2022, pp. 141-144. https://doi.org/10.1515/cdbme-2022-1037 (peer reviewed)

  • Wittek, A.; Fritzen C.-P.; Huß A.; Blase C.: Reproducibility of in vivo constitutive parameter identification based on 4D ultrasound strain imaging, in: Tavares, J. M. R. S., Bourauel, C., Geris, L., Vander Slote, J., Computer Methods, Imaging and Visualization in Biomechanics and Biomedical Engineering II, Selected Papers from the 17th International Symposium CMBBE and 5th Conference on Imaging and Visualization, September 7-9, 2021, Lecture Notes in Computational Vision and Biomechanics 38, Springer 2022, 153-169. (peer reviewed)
  • Derwich, W.; Wiedemann, A.; Wittek, A.; Filmann, N.; Blase, C.; Schmitz-Rixen, T.: Intra- and interobserver variability of 4D ultrasound examination of the infrarenal aorta, Journal of ultrasound in medicine 2021, doi: 10.1002/jum.15622 (peer reviewed)
  • Großkreutz, D.; Tennert, R.; Lauth, J.: Untersuchung der mechanischen Festigkeit, der Druckzeit und der erforderlichen Materialmenge unterschiedlicher Infillmuster beim 3D-Druck. Maschinen im Modellbau, 05/2021
  • Krenzlin, H.; Foelger, A.; Mailänder V.; Blasé, C.; Brockmann, M.; Düber, C.; Ringel, F.; Keric, N.: Novel Biodegradable Composite of Calcium Phosphate Cement and the Collagen I Mimetic P-15 for Pedicle Screw Augmentation in Osteoporotic Bone. Biomedicines, 9, 1392. doi 10.3390/biomedicines9101392 (peer reviewed)
  • Völz, D.; Eisele, J.; Benderoth, G., Schulze, U.: To improve patients’ empowerment by selfconnection in home parenteral nutrition. Current Directions in Biomedical Engineering 2021; 7(2), 49-52, doi: 10.1515/cdbme-2021-2013, (peer reviewed)
  • Blase, C.; Hegner, A.; Huss, A.; Ludwig, H.-R.; Wittek, A.: Using personalized biomedical engineering to improve patient treatment: two examples of the use of numerical methods to fine-tune personalization. EnginSoft: The Simulation Based Engineering & Sciences Magazine, 17, 10-13.
  • Derwich, W.; Wittek, A.; Hegner, A, Fritzen.; C.-P.; Blase C.; Schmitz-Rixen T.; Comparison of Abdominal Aortic Aneurysm Sac and Neck Wall Motion with 4D Ultrasound Imaging, Eur J Vasc Endovasc Surg 60 (2020) 4, 539-547, doi: 10.1016/j.ejvs.2020.06.027 (peer reviewed)
  • Großkreutz, D.: Werkstoffe für Additive Fertigungsverfahren. In: Greven / Magin: Werkstoffkunde und Werkstoffprüfung für technische Berufe, 19. Auflage, Verlag Handwerk und Technik GmbH, Hamburg, 2020
  • Jebabli, M.; Großkreutz, D.; Michalke, Th.: Prozessgestaltung und Produktqualität beim Selective Laser Melting - Statistische Versuchsplanung als Werkzeug der Prozessoptimierung. Stahl und Eisen, 8/2020
  • Jebabli, M.; Großkreutz, D.; Michalke, Th.: 3D-Metalldruck - Raue und ungleichmäßige Oberflächen vermeiden. Wie Energiedichte und Laserleistung die Oberfläche eines per selektiven Laserschmelzens (SLM) gefertigten Bauteils beeinflussen. Maschinenmarkt, 07/2020
  • Roth, K.-E.; Betz, S.; Schmidtmann, I.; Maier, G. S.; Ludwig, H.-R.; Vogl, T.; Theisen, A.; Brochhausen, C.; Götz, H.; Kurth, A. A.; Drees, P.: Biological responses to individualized small titanium implants for the treatment of focal full-thickness knee cartilage defects in a sheep model, The Knee 27(3), 1078-1092, PMID: 32307219, doi: 10.1016/j.knee.2020.03.012 (peer reviewed)
  • Völz, D.; Blase, C.; Huß, A.: Digitalisierung und Individualisierung. Technik & Mensch, 3, 9-10.
  • Wittek, A.: Mechanical and pathophysiological in vivo characterization of the individual aortic wall based on 4D ultrasound imaging. Dissertation (2020), Schriftenreihe der Arbeitsgruppe für Technische Mechanik im Institut für Mechanik und Regelungstechnik – Mechatronik, Bd. 17, Universität Siegen, doi: 10.25819/ubsi/10045
  • Blase, C.; Derwich, W.; Schmitz-Rixen, T.; Huß, A.; Fritzen. C.-P.; Wittek, A.: Validation of aortic wall motion measurement by 4D ultrasound and effects of measurement uncertainty on inverse identification of the walls constitutive behaviour. In: P Nithiarasu, M Oshima und A Coccarelli (Hg.): CMBE19 Proceedings, Bd. 2. Cardiff, UK: Zeta Computational Resources Ltd, 2019. S. 756–758. (peer reviewed)
  • Blase, C.; Derwich, W.; Schmitz-Rixen, T.; Fritzen. C.-P.; Huß, A.; Wittek, A.: Validation of aortic wall motion measurement by 4D ultrasound and effects of measurement uncertainty on inverse identification on inverse identification of the wall’s constitutive behavior, in: Eberhardsteiner J, Schöberl J (Eds.),  90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, February 18-22, 2019, Vienna, Austria – Book of Abstracts, TU Verlag an der Technischen Universität Wien, ISBN 978-3-9030024-84-7, S. 109 [zum Volltext] (peer reviewed)
  • Gabaruk, J.; Logofatu, D.; Großkreutz, D.; Andersson, C.: Teaching Java and Object Oriented Programming by Using Children Board Games. IEEE EDUCON, Dubai, 2019, doi: 10.1109/EDUCON.2019.8725248 (peer reviewed)
  • Großkreutz, D.; Logofatu, D.; Schott, A.: The Impact of Laboratory Courses in Technical Study Programs – Knowledge Earning or Not Much Learning? An approach from daily observation. IEEE EDUCON, Dubai, 2019, doi: 10.1109/EDUCON.2019.8725248 (peer reviewed)
  • Huß, A.: Jeder Mensch ist einzigartig! Forschungslabor Personalized Biomedical Engineering. Forschungsbericht der Frankfurt UAS 2019, S. 34-35.
  • Huß, A.; Völz, D.; Blase, C.: Maßgeschneiderte Ersatzteile - Neue Möglichkeiten in der Medizintechnik. Almanach 2019 der Frankfurt University of Applied Sciences, 12-13 [zum Volltext]
  • Schonhoff, M.; Heinze, A., Carrillo, J., Lopinski, A.; Großkreutz, D.; Hanusek, St.: Development and manufacturing of a custom made implant regarding the new European Medical Device Regulation Current Directions, Biomedical Engineering 2019; 5 (1): 253 – 256, doi: 10.1515/cdbme-2019-0064
  • Wittek A, Derwich W, Schmitz-Rixen T, Huß A, Blase C. Spatially resolved distensibility of aortic walls determined from 4D ultrasound measurements. In: P Nithiarasu, M Oshima und A Coccarelli (Hg.): CMBE19 Proceedings, Bd. 1, 2019. 2 Bände. Cardiff, UK: Zeta Computational Resources Ltd, S. 282–283 [zum Download auf der CMBE-Seite] (peer reviewed)
  • Wittek, A.; Fritzen, C-P.; Huß, A.; Blase, C.: Inverse Identification of the individual, non-linear and orthotropic material properties of human internal anatomical structures based on non-invasive real-time 3D ultrasound full-field measurements. In: NAFEMS (Hg.): Material Properties in Structure Analysis. Modeling, Calibration, Simulation & Optimization. NAFEMS (2019), ISBN 978-1-910643-19-8, S. 129–138
  • Amjad, U.; Blase, C.; Alnuaimi, H. N.; Dao, C. M.; Bereiter-Hahn, J.; Kundu, T.: Effects of transducers on guided wave based structural health monitoring. Proceedings of SPIE - The International Society for Optical Engineering, 10600, doi: 10.1117/12.2300841 (peer reviewed)
  • Anderl, R.; Rollmann, T.; Völz, D.; Heimrich, F.; Steinmetz, C.; Frisch, S.; Nattermann, R.; Maltzahn, S.; Mosch, C.: Virtuelle Produktentstehung. In: Rieg, F. and Steinhilper, R. (eds.), Handbuch Konstruktion. München. Carl Hanser Verlag GmbH & CO.KG, pp. 1017-1030. (Überarbeitung)
  • Blase, C.; Amjad, U.; Kundu, T.; Bereiter-Hahn, J.; Blume, M.; Sader, R.: Characterization of dental tissue by reflection and transmission ultrasound microscopy. Proceedings of SPIE - The International Society for Optical Engineering, 10600. doi: 10.1117/12.2300510 (peer reviewed)
  • Großkreutz, D.; Logofatu, D.; Schott, A.: The Impact of Video Clips on Teaching in Technical Study Programs - Learning Faster or Learning Desaster? An approach from the perspective of a "manufacturing technology" module. IEEE EDUCON, Santa Cruz de Tenerife, Spain, 2018 (peer reviewed)
  • Wittek, A.; Derwich, W.; Fritzen, C.-P.; Schmitz-Rixen, T.; Blase C.: Towards non-invasive in vivo characterization of the pathophysiological state and mechanical wall strength of the individual human AAA wall based on 4D ultrasound measurements, ZAMM 2018, doi: 10.1002/zamm.201700353 (peer reviewed)
  • Blase, C.; Wittek, A.; Derwich, W.; Schmitz-Rixen, T.: Spatially resolved 3D in vivo strain analysis of abdominal aortic aneurysms (AAA), , in: Nithiarasu, P. and Robertsion, A. M., CMBE17 Proceedings, Bd. 1, 2017. 2 Bände. Swansea, UK: Zeta Computational Resources Ltd, 156–158, ISBN: 978-0-9562914-4-8 [zum Download auf der CMBE-Seite] (peer reviewed)
  • Wittek A, Blase C, Derwich W, Schmitz-Rixen T and Fritzen C-P, Characterization of the mechanical behavior and pathophysiological state of abdominal aortic aneurysms based on 4D ultrasound strain imaging, in: SPIE Proceedings, 10333, Optical Methods for Inspection, Characterization, and Imaging of Biomaterials III, 1033303 (2017/06/26); doi: 10.1117/12.2271979 [Author's Version] (Invited paper)
  • Wittek, A.; Derwich, W.; Fritzen, C.-P.; Schmitz-Rixen, T. and Blase, C.; Validation of full field measurement of aortic wall motion by 4D-ultrasound, in: Nithiarasu, P. and Robertsion, A. M., CMBE17 Proceedings, Bd. 2, 2017. 2 Bände. Swansea, UK: Zeta Computational Resources Ltd, 656–659, ISBN: 978-0-9562914-4-8 [zum Download auf der CMBE-Seite] (peer reviewed)

Konferenzbeiträge

  • Hucke, L.; Teixeira, G.; Schwer, J.; Seitz, A.; Wittek, A.: Hyperelastic material properties of porcine growth plates vary by anatomical location, 28th Congress of the European Society of Biomechanics, 9-12 July 2023, Maastricht, The Netherlands.

  • Schwer, J.; Hucke, L.; Rasche, V.; Wittek, A.; Seitz, A.; In-situ determination of spatial strain maps in porcine growth plates based on MRI loading experiments, 28th Congress of the European Society of Biomechanics, 9-12 July 2023, Maastricht, The Netherlands.

  • Kerr, K. E.; Derwich, W.; Wittek, A.; Blase, C.: Evaluation of 4D ultrasound data to determine the relationship between 3D aortic wall displacement and age, 28th Congress of the European Society of Biomechanics, 9-12 July 2023, Maastricht, The Netherlands

  • Hucke, L.; Wittek, A.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Stief, F.; Huß, A., 2022. Effects of tension band implants on the mechanical loading of the femoral growth plate during guided growth in adolescents. 11th European Solid Mechanics Conference (2022), Galway.

  • Hucke, L.; Wittek, A.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Huß, A., 2022. Effects of tension band implants on the mechanical loading of the femoral growth plate during guided growth in adolescents. IX International Conference on Computational Bioengineering (2022), Lissabon.

  • Hucke, L.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Stief, F.; Huß, A.; Wittek, A., 2022. Effects of tension band implants on the mechanical loading of the femoral growth plate during guided growth in adolescents. EuroMech Colloquium 627: Current Challenges in Soft Tissue Mechanics (2022), Frankfurt am Main.

  • Blase, C.; Wittek, A.; Hegner, A.; Derwich, W.; Huß, A., 2022. Using 4D ultrasound imaging to quantify arterial wall properties in vivo. 27th Congress of the European Society of Biomechanics (2022), Porto.

  • Eichner, N.; Wittek, A.; Hanusek, S.; Holder, J.; van Drongelen, S.; Stief, F.; Wuttke, U., NumerischeUntersuchung der Einflüsse einer Hüftgelenksendoprothese auf die Gelenkbelastung, 12. Kongress der Deutschen Gesellschaft für Biomechanik, 28.09.-30.09.2022, Köln

  • Wittek, A.; Holder, J.; van Drongelen, S.; Stief, F.; Wuttke, U.; van Drongelen, S.: Comparison of numerically estimated hip joint muscle forces before and after total hip replacement, 12. Kongress der Deutschen Gesellschaft für Biomechanik, 28.09.-30.09.2022, Köln

  • Hucke, L.; Holder, J.; van Drongelen, S.; Gámez López, A. J.; Stief, F.; Huß A.; Wittek, A.: Effects of tension band implants on the mechanical loading of the femoral growth plate during guided growth in adolescents,12. Kongress der Deutschen Gesellschaft für Biomechanik, 28.09.-30.09.2022, Köln

  • Völz, D.; Benderoth, G.; Toperi, T.: EasyGoing@Home! Looking for a reproducible efficient flushing process in home parenteral nutrition, 2022 International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), 2022, pp. 43-48, doi: 10.1109/ISMSIT56059.2022.9932796.

  • Wittek, A.; Fritzen, C.-P.; Huß, A.; Blase, C.: Reproducibility of in vivo constitutive parameter identification based on 4D ultrasound strain imaging. 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), 7. – 9. 09.2021
  • Hegner, A.; Blase, C.; Wittek, A.; Huß, A.; Gamez, A.; Derwich, W.: Use of 3D Ultrasound with Speckle Tracking to Identify Calcified Areas in Abdominal Aneurysms. 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), 7. – 9. 09.2021
  • Hegner, A.; Blase, C.; Wittek, A.; Huß, A.; Schmitz-Rixen, T.; Derwich W.: Use of 3D Ultrasound to Identify Calcifications in Abdominal Aortic Aneurysms. Basic Vascular Science Virtual Spring Meeting, 2. – 4.06.2020
  • Wittek, A.; Fritzen, C.-P.; Huß, A.; Blase, C.; Reproducibility of in vivo constitutive parameter identification based on 4D ultrasound strain imaging, 54th Conference of the German Society for Biomedical Engineering, 25.09. – 01.10.2020, Leipzig, Germany
  • Auermann, M. ; Ben Nablia, S.; Ludwig, H.-R. ; Weimar, P. : Real-time synchronization of active force control and movement axes in a knee simulator with viscoelastic elements in the force flow, 53rd Annual Conference of the German Society for Biomedical Engineering, 25. – 26.09.2019, Frankfurt am Main, Germany
  • Blase, C.; Hegner, A.; Huß, A.; Ludwig, H.R.; Wittek, A.: Personalized Biomedical Engineering -Exam-ples of Using Numerical Methods for Better Treatments, 35th International CAE Conference, 28. – 29.10.2019, Vicenza, Italy
  • Carrillo, J.; Heinze, A.; Lopinski,A.; Schonhoff, M.; Großkreutz, D.; Hanusek, S. : Development and manufacturing of a custom made implant regarding the new European Medical Device Regulation. BMT 2019 -53rd Conference of the German Society for Biomedical Engineering (DGBMT within VDE), Frankfurt am Main, 25.-26.09.2019
  • Gabaruk, J.; Logofatu, D.; Großkreutz, D.; Andersson, C.: Teaching Java and Object Oriented Programmingby Using Children Board Games. IEEE EDUCON, Dubai, 2019
  • Großkreutz, D.; Logofatu, D.; Schott, A.: The Impact of Laboratory Courses in Technical Study Programs –Knowledge Earning or Not Much Learning? An approach from daily observation. IEEE EDUCON, Dubai, 2019
  • Hegner, A.; Blase, C.; Wittek, A.; Huß, A.; Schmitz-Rixen, T.; Derwich, W.: Entwicklung einer Methode für die Registrierung von 3D Blutgefäßmodellen basierend auf CT-A und Ultraschallbildgebung. 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB), 3. – 5.04.2019, Berlin, Germany
  • Hegner, A.; Blase, C.; Wittek, A.; Huß, A.; Schmitz-Rixen, T.; Derwich, W.: A Method for the Registration of 3D Blood Vessel Models. 53rd Annual Conference of the German Society for Biomedical Engineering, 25. – 26.09.2019, Frankfurt am Main, Germany
  • Hegner, A.; Wittek, A.; Derwich, W.; Huß, A.; Schmitz-Rixen, T.; Blase, C.: Development of a Method for the Registration of 3D Blood Vessel Models based on CT-A and Ultrasound Imaging, European Society for Vasular Surgery 7th Spring Meeting, 10. – 11.05.2019, Royal Free Hospital, London, UK
  • Huß, A.: Personalized Biomedical Engineering -Examples of Using Numerical Methods for Better Treatments, 39th TechNet Alliance Meeting, 3.-4. May 2019, Rotterdam, NL
  • Tampe, S.; Michalke, T.; Blase, C.; Huß, A.: Materialidentifikation und -modellierung von generativ gefertigten Bauteilen aus PEEK. BMT 2019 -53rd Conference of the German Society for Bio-medical Engineering (DGBMT within VDE), Frankfurt am Main, 25.-26.09.2019
  • Tampe, S.; Michalke, T.; Blase, C.; Huß, A.: Materialidentifikation von additiv gefertigten Bauteilen aus PEEK. Forschungstag 2019 der Hessischen Hochschulen für Angewandte Wissenschaften (HAW), Frankfurt am Main, 29.10.2019
  • Völz, D.; Pohl, S.: Shoe integrated power measurement for cycling, 53rd Conference of the German Society for Biomedical Engineering, 25. – 26.09.2019, Frankfurt am Main, Germany
  • Wittek, A.; Derwich, W.; Schmitz-Rixen, T.; Huß, A.; Fritzen, C.-P.; Blase, C.: Spatially resolved distensibility of healthy, diseased, and aneurysmal aortic walls determined from temporally resolved 3D ultrasound measurements, 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB), 3. – 5.04.2019, Berlin, Germany
  • Wittek, A.; Derwich, W.; Huß, A.; Schmitz-Rixen, T.; Blase, C.: Validation of aortic wall motion measurement by 4D ultrasound, European Society for Vasular Surgery 7th Spring Meeting, 10. – 11. Mai 2019, Royal Free Hospital, London, UK.
  • Wittek, A.; Derwich, W.; Schmitz-Rixen, T.; Fritzen C.-P.; Huß, A.; Blase, C.: Validation of Aortic Wall Motion Measurement by 4D Ultrasound, 53rd Conference of the German Society for Biomedical Engineering, 25.-26.09.2019, Frankfurt am Main, Germany
  • Wittek, A.: In vivo assessment of the heterogeneity of the human aortic wall's local elastic properties and its changes with age and disease based on 4D ultrasound, 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 23.-27. Juli 2019, Berlin, Gemany (Invited talk)
  • Wuttke, U.: Meingast, M.: Auslegung von Schraubenverbindungen mit Hilfe der VDI Richtlinie 2230 –analytische und numerische Adaptionen der Richtliniean die Aufgabenstellungen von Heute und Morgen, 37. CADFEM ANSYS Simulation Conference, 2019
  • Achour, A.; Hegner, A.; Jebabl,i M.; Miah, N.; Benderoth, G.; Huß, A.: Multifunctional Test-Setup to Characterize the Mechanical Properties of Human Beard Hair, 52rd Annual Conference of the German Society for Biomedical Engineering. 26.-28. September 2018, Aachen, Deutschland.
  • Blase C.: Aortic Biomechanics – Using dynamic ultrasound imaging to analyse the pathophysiological state of the aortic wall, Spring Meeting of the European Society for Vascular and Endovascular Surgery (ESVS), 25. – 26.5.2018, Frankfurt am Main, Deutschland. (Keynote Lecture)
  • Blase, C.; Wittek A, Derwich W, Schmitz-Rixen T, Huß A.: Spatially resolved distensibility of healthy and diseased aortic walls determined from temporally resolved 3D ultrasound measurements, 10th European Solid Mechanics Conference (ESMC2018), 2.-6. Juli 2018, Bologna, Italien. (Invited talk)
  • Blase, C.; Wittek A, Derwich W, Schmitz-Rixen T, Huß A.: Spatially resolved distensibility of healthy, diseased, and aneurysmal aortic walls determined from temporally resolved 3D ultrasound measurements, 52nd DGBMT Annual Conference (BMT2018), 26.-28. September 2018, Aachen, Deutschland
  • Großkreutz, D.; Logofatu, D.; Schott, A.: The Impact of Video Clips on Teaching in Technical Study Programs - Learning Faster or Learning Desaster? An approach from the perspective of a "manufacturing technology" module. IEEE EDUCON, Santa Cruz de Tenerife, Spain, 2018
  • Hegner, A.: Parameter Identification of Hyperelastic Material Models for Abdominal Aortic Aneurysm Wall Tissue, 6th ESVS Spring Meeting.7th April 2018, Frankfurt am Main, Germany
  • Hegner, A.; Blase, C.; Wittek, A.; Dominico, S.; Derwich, W.: Parameter Identification of hyperelastic Material Models for Abdominal Aneurysm Wall Tissue. 52nd Annual Conference of the German Society for Biomedical Engineering, 26.-28. September 2018, Aachen, Deutschland.
  • Jebabli, M.: D-optimale Versuchsplanung zur Identifikation der Einflüsse der Laserparameter auf die Maßhaltigkeit beim selektiven Laserschmelzen, DoE-Kongress: "...how to get the most out of data!", 17. Oktober 2019, Kassel, Deutschland
  • Logofatu, D.; Andersson, C.; Großkreutz, D.; Muharremi, F.; Falkenberg, E.: On Teaching Calculus for Prospective Engineers and Computer Scientists - A Case Study Monitoring of Six Semester Calculus at Frankfurt UAS, IEEE EDUCON, Santa Cruz de Tenerife, Spain, 2018
  • Wittek. A.; Derwich, W.; Schmitz-Rixen, T.; Huß, A.; Blase, C.: Validation of an inverse approach for in vivo identification of AAA wall properties based on 4D ultrasound strain imaging, 10th European Solid Mechanics Conference (ESMC2018), 2.-6. Juli 2018, Bologna, Italien. (Invited talk)
  • Wittek, A.; Derwich, W.; Schmitz-Rixen, T.; Huß, A.; Blase, C.: Verification of a Finite Element Updat-ing Approach for in vivo Identification of the Nonlinear and Orthotropic Properties of Aortic Walls based on 4D Ultrasound Strain Imaging, 52nd DGBMT Annual Conference (BMT2018), 26.-28. September 2018, Aachen, Deutschland
  • Blase, C.;  Wittek, A.; Derwich, W.; Schmitz-Rixen, T.: Spatially resolved 3D in vivo strain analysis of abdominal aortic aneurysms (AAA), 5th International Conference on Computational and Mathematical Engineering, 10. – 12. April 2017, Pittsburgh, PA, United States
  • Blase, C.;  Wittek, A.; Derwich, W.; Schmitz-Rixen, T.: Validation of full field measurement of aortic wall motion by 4D-ultrasound, ESVS Spring meeting 2017 – Vascular Biology, Materials & Engineering, 19. – 20. Mai 2017, Leiden, Niederlande
  • Wittek, A.; Blase, C.; Derwich, W.; Schmitz-Rixen, T. and Fritzen, C.-P.: Characterization of the mechanical behavior and pathophysiological state of abdominal aortic aneurysms based on 4D ultrasound strain imaging, SPIE Optical Metrology, 25. – 29. Juni 2017, München, Deutschland (Invited talk)
  • Wittek, A.; Derwich, W.; Fritzen, C.-P.; Schmitz-Rixen, T. and Blase, C.: Validation of full field measurement of aortic wall motion by 4D-ultrasound, 5th International Conference on Computational and Mathematical Engineering, 10. – 12. April 2017, Pittsburgh, PA, United States
  • Wittek, A.: Bestimmung der individuellen Materialeigenschaften im infrarenalen Aortenaneurysma, 33. Jahrestagung der Deutschen Gesellschaft für Gefäßchirurgie und Gefäßmedizin, 27. – 30. September 2017, Frankfurt am Main, Deutschland

Kontakt

Personalized Biomedical Engineering

Nibelungenplatz 1
60318 Frankfurt am Main

E-Mail: pbe-lab(at)fra-uas.remove-this.de

Kristina Danneberg, ID: 9845, 
letzte Änderung: 29.02.2024